Maximum Sheet Size – 600 x 420 mm
Minimum sheet size – 210 x 180 mm
Maximum Stamping Size 584 x 410 mm
Paper thickness – 100 – 1200 g/m^2
Maximum speed – 6500 sheets/hour
Maximum pressure – 150 Ton
Max. Pile height at feeder – 850 mm
Max pile height at delivery – 850 mm
Main motor power – 7.5 kW
Total Power – 15 kW (diecutting), 30 kW (stamping)
Dimension – L 3000 x W 1600 x H 2000 mm
Weight – 4.2 Ton
- Standard equip with one side lay with sensor at the operation side
- Equip with front lay with sensor positioning system
- For digital printing, IVRS camera inspection with servo driven side lay can be used as optional, the camera will take the printing mark on the paper and the side lay is driven by servo motor according to this printing mark registration
- The installation of anti-obstacle device on the feeding section is to prevent obstacle from entering into the machine which may cause damages to the machine
- Equipped with German design wise feeding system offered by KBA-mms
- Lateral blowing system is adopted to enhance paper separation. To detect double sheet during transportation, we have electronic sensor to do so
- On the suction head, there is a micro adjustments device to adjust paper feeding, increase efficiency
- Equipped with double sheet detector
- 2 units of longitudinal foil feeding system as standard
- Foil rewinding unit and foil unwinding unit are inside the machine, changing foil and replacing waste foil can be done outside of the machine easily
- The whole unit can slide outside of he machine, changing foil can be done easily
- Standard with 6 individually controlled heating zones with tolerance ±1℃, can be
- Servo motor control pressure automatically with auto-drop pressure device
- Air blowing foil separation device is available
- Dwell time device is available for big area stamping
- Standard 2 units of longitudinal foil feeding system.
- Foil rewinding unit and foil unwinding unit are inside the machine and can be pulled out for changing the foil and removing the waste foil.
- Standard with 6 individually controlled heating zones with a tolerance of +/- 1 degree C.
- Servo motors control the pressure automatically and has an auto-drop pressure device
- Air blowing foil separation device is available.
- Dwell time device is available for large area stamping.